How ecological filtration for swimming pools works

The principle is very simple : The water circulates from the bottom drain and the skimmers to the filter module tank (located in the pool backfill), solely by the principle of "communicating vessels".

It passes through a first filter whose role is to retain "large" impurities (insects, twigs, etc.), then it is filtered much more finely thanks to a second filter of very high capacity (40 m3/h) which can retain impurities up to 15 microns!. All this movement of water through the 2 filters is done solely by gravity, without depression or pressure from the pump, in short: WITHOUT ENERGY

A latest generation digital motor submersible micro pump , with very low power consumption (50 W/h), will pump the water, free of all impurities, towards the swimming pool through conventional discharges.

Each filter module has a flow capacity of 7 m3/h for the pump, and 40 m3/h for the filter. Depending on the volume of the pool to be equipped, 1 or more modules are installed (1 module per 25 m3 of water).

Optionally, the system can be equipped with automatic water treatment by electrolysis and automatic PH regulation.

The pump's electrical consumption is 6 times lower than that of a conventional pump for the same output and allows for significant savings.
But with the "solar option" for our ecological filter modules, the annual cost of your pool's electricity consumption will be: ZERO EURO !

It is thanks to the very low electrical consumption of the submersible pump that the sun will be sufficient to provide the electrical energy it needs!

The power of this solar kit will compensate for the consumption of the pump, the additional energy that will not be consumed by your swimming pool will be automatically INJECTED INTO YOUR NETWORK and can be used by the other domestic appliances in your home and thus reduce your electricity bill.